HBM PACEline 1-CLP/26kN, Инструкция по монтажу

Страница: 7 / 96

Safety instructions
CLP
A03616_04_YI0_02 HBM: public
5
If force transducers are not used according to their designated use, or if the
safety instructions or specifications in the mounting and operating instructions
are ignored, it is also possible that the force transducer may fail or malfunction,
resulting in injury to persons or damage to property (due to the loads acting on
or being monitored by the force transducer).
The scope of supply and performance of the transducer covers only a small
area of force measurement technology, as measurements with piezoelectric
sensors presuppose the use of electronic signal conditioning. In addition,
equipment planners, installers and operators should plan, implement and re­
spond to the safety engineering considerations of force measurement
technology in such a way as to minimize residual dangers. Prevailing regula­
tions must be complied with at all times.
Important instructions for your safety are specifically identified. It is essential to
follow these instructions in order to prevent accidents and damage to property.
Symbol Significance
WARNING
This marking warns of a potentially dangerous situa­
tion in which failure to comply with safety require­
ments
could result in death or serious physical injury.
CAUTION
This marking warns of a potentially dangerous situa­
tion in which failure to comply with safety require­
ments
could result in slight or moderate physical in­
jury.
Notice
This marking draws your attention to a situation in
which failure to comply with safety requirements
could lead to damage to property
Waste disposal
In accordance with national and local environmental protection, material recov­
ery and recycling regulations, old transducers that can no longer be used must
be disposed of separately and not with normal household waste.
If you need more information about disposal, please contact your local authori­
ties or the dealer from whom you purchased the product.