HBM FS64, Руководство по установке

Страница: 14 / 36

Sensor Installation
14
A4263-3.5 HBM: public
FS64
Fig. 2.3
Drill the holes according to the chosen M6 anchors (sug­
gested anchor,
see section 2.1.2, page 11 ) with a mini­
mum depth of 42 mm.
Verify the screws position with a measuring tape and
then anchor them definitely (
Fig. 2.3 ), tightening them
with a torque of 5Nm.
Remove the nut before proceeding.
2.2.2 Placing the Sensor
Carefully take the tilt sensor out of the transportation box
and place it on the support (
Fig. 2.4 ).
Important
The tilt sensor is a sensitive sensor. Please take extra
care when handling the sensor.