HBM FS64, Руководство по установке

Страница: 25 / 36

Sensor Installation
FS64
A4263-3.5 HBM: public
25
2.3.2 Preparing the Surface
Prepare the surface as for a single tilt sensor.
Using the mounting plate, mark and drill the four points in
order to anchor the plate vertically (
Fig. 2.16 ). Drill the
holes according to the chosen M8 anchors (suggested
anchor,
see section 2.1.2, page 11 ) with a minimum hole
depth of 44 mm.
Fig. 2.16