HBK FS22SI, Руководство пользователя

Страница: 81 / 90

81
FS22SI
BRAGGMONITOR SI USER INTERFACE
The “save image" button allows one to save a .bmp file containing an instant capture of
the displayed spectral graph (number
9 in Fig. 7.24 ).
7.2.4 Configuration
Acquisition configuration allows one to perform sensors configuration. To accomplish
this step correctly, sensors' calibration sheets might be needed.
Fig. 7.31 Configuration View
Clear configuration
If an old configuration is set, it is possible to clear it and start a new configuration press­
ing button “new" (number
11 in Fig. 7.31 ). Be aware this operation will discard all previous
configurations of all channels.
Add, Edit and Delete Sensor(s)
In order to Add a sensor to a configuration, the user is required to fill the fields (Name,
Central wavelength (nm), Range Min. Value (nm), Range Max, Value (nm) and Formula) in
the table (number
2 in Fig. 7.31 ). In the end, the new sensor is automatically sorted in the
list by ascendant order using its central wavelength (nm). If any error is detected (for
example, the Range Min. Value (nm) is higher than the central wavelength (nm) an auxil­
iary message is displayed in the “General Bar".
To Edit a sensor, the user can manually edit the fields corresponding to that particular
sensor. The user can also delete a single sensor or all the sensors in an optical channel,