Assembly Instructions M8086-EN
M8086-EN 2020-02
2/6
1.
Proceed as follows in order to cool down the unit and empty
the mould (mould evacuation):
Display menu page
Functions
.
Select the function
Cooling
and activate with the
key.
If the function
Mould evacuation
is available, select it and
activate it with the
key.
The activated function is indicated with the
symbol.
Units HB-100X_4 and HB-100/140/160Z_4 without function
Mould evacuation
: Loosen the drain connection (G) slowly until
the unit is depressurized.
2.
Main switch off, remove the plug from the mains and empty
the unit.
3.
Remove the cover from the unit (see Instruction Manual
Chapter Maintenance).
4.
Loosen the screws in the front panel and hinge it down.
