HAZET-WERK 772-2/16, Руководство по эксплуатации

Страница: 14 / 28

14
b
For Your Safety
4. Storage
The tool has to be stored according to
the following conditions:
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggres-
sive substances.
• Do not store the tool outdoors.
• Keep the tool out of reach of children.
• Storage temperature: 0°C up to +40°C with
low air humidity.
5. Dangers emanating
from the tool
Before each use, check the HAZET Tool for
full functional efficiency. Do not use the tool if
its functional efficiency cannot be ensured or if
damage is detected. If the tool is used, when
it is not in full working order, you risk severe
injuries to persons and damage to property.
• Any service or repair work must be carried
out by qualified personnel only. In order
to guarantee long term operational safety,
only original spare parts of the manufacturer
must be used.
• Do not remove any safety devices and/or
housing parts.
• Do not operate the tool, if safety covers or
safety devices are missing or defective.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from warranty and liability.
• Keep children away from tools. Unattended
tools could be used by unauthorized per-
sons and injure them or other persons.
• Pay attention to the loading. The maximum
load must be equal to or below the author-
ized load. The operated nuts must be able to
absorb the load.
• Overloading may cause the failure of the sys-
tem and therefore cause personal injury or
damage to property.
•
Only use spare parts, attachments and
accessories that are recommended by the
manufacturer.
•
The tool must only be used if it is in good
working order.
• Always keep the working area clean, well
ventilated and well lit.
• Do not use the tool under the influence of
alcohol or drugs.
• Any repair­work must be carried out by
authorized persons only.
• Make sure that there is no unauthorized person-
nel and/or unnecessary devices in your working
area.