17
Please secure separate parts against falling off!
Tools must not tilt!
3.4 Use
Installation:
• After approx. 5 rotations of the compression nut 4929-2 remove
the half shells of the centring unit 4925-56 and afterwards the
adapter ring. Fig. 6, 7, 8.
• Operate the compression nut with HAZET ratcheting combina-
tion wrench 606-24, while at the same time holding the spindle
using a double box-end wrench 630-8 x 9, until the rubber lips
of the silent block, on the side of the housing, open. Check it
through the opening of the housing.
3
Design and function
