HAZET-WERK 4000896156337, Руководство по эксплуатации

Страница: 15 / 24

15

For your safety
Always wear personal protective equipment!
3. Dangers that may arise
from the tool
Before each use, check the HAZET tool for full
functionality. Do not use the tool if its
functional efficiency cannot be ensured or
if damage is detected. If you use the tool
despite full functionality not being guaranteed,
this poses a risk of serious injury, health
problems and material damage.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Do not remove safety devices and/or
housing parts.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect condition.
• For safety reasons, any modification to
HAZET tools is strictly forbidden. Any
modification of the tool will result in
immediate exclusion from express or implied
warranty and liability.
• Wear working gloves and
safety glasses.
Pneumatic tools can disperse
chips, dust and other abrad-
ed particles at high speed
which may result in severe
eye injuries. Compressed air
is dangerous. The air flow
may cause harm to sensitive
parts of the body like eyes,
ears, etc. Dust and objects
being raised by the air flow
may cause injuries.
• Wear hearing protection.
Long exposure to the work-
ing noise of pneumatic tools
may result in permanent
hearing loss.
• Wear a face mask or
breathing protection.
Breathing in the vapours of
some materials like adhe-
sives and chemicals contain-
ing tar can, over a prolonged
period, cause serious harm.
• Wear tight-fitting protec-
tive clothing. Tools with
moving parts can get caught
in your hair, clothes, jewel-
lery or other loose objects,
which can lead to serious
injury. Never wear clothing
that is too loose and/or clothing with bands
or loops, etc. which may get caught in the
moving parts of the tool. During the work,
take off jewellery, watches, identification
tags, bracelets, necklaces, etc. that could
get caught in the tool. Never touch the mov-
ing parts of a tool. Long hair should be tied
back or covered.
• Keep pneumatic tools out of the hands
of children. Unattended tools or tools that
are connected to the compressed air supply
may be used by unauthorised persons and
could cause injury to them or to other per-
sons.