HazeBase piccola, Руководство пользователя, Страница: 11 / 21

pi cc ola
5.4 Operation via DMX / RDM
The menu item DMX has now been added to the main
menu. By selecting this menu item you get to the setting of
the DMX address.
This can be changed using DMX address the minus button
(9) and plus button (10). The address is automatically
adopted after two seconds. This is indicated by flashing the
address .
If a valid DMX signal is received, a small "R" appears above
the quantity display.
Since the Piccola needs energy from the battery for DMX reception, in this case it
switches off one hour after the last valid DMX signal. This saves the battery.
5.5 Operation via cable(option)
The remote control “Remote” menu item has now been
added to the main menu. Selecting this menu item takes
you to the settings for the connected remote control. If a
remote control has not yet been connected, “no remote
found” appears in the display. As soon as a cable remote
control is connected, however, an "analog found" appears.
If a valid signal is received, a small "R" appears above the
quantity display. If the potentiometer on the remote control
is turned over 10% and the switch is switched on, the
fogging process is started. The output can now be 25%. 50%, 75% and 100% can be
set.
5.5 Operation via radio remote control (option)
If a radio remote control is connected, "radio found"
appears in the display. The fogging process can be
triggered by pressing the appropriately programmed button
on the hand transmitter. The pump value is adopted from
the setting on the device.
When using a radio remote control, several hand-held
transmitters can be trained on the receiver. A selection of
10