HazeBase piccola, Руководство пользователя, Страница: 10 / 21

pi cc ola
If the trigger button (1) has been used, the fogging process starts immediately,
according to the preset amount of fog. As soon as the trigger button is released, the
reheating process begins to empty the evaporator tube. After 10 seconds the Pi
cc ola
is switched off again and therefore no longer uses any electricity.
The following display appears in this stand-alone mode
No menu item has yet been selected. You can now switch
through the menu with the minus / left (9) and plus / right
(10) buttons. The menu sequence is
Pump
→
Mode
→
Info.
Use the Enter (11) key to switch to the menu item Pump setting. The following
settings can now be made here:
single
→
25%
→
50%
→
75%
→
100%.
With the setting
single-shot, only three pump blows are generated. This creates a
small burst of fog. To generate a second burst of fog, the release button must be
released and then pressed again. Leak tests can be carried out with this mode.
5.3 Mode selection of
the 5-pin XLR socket The next menu item is the setting of the mode for the 5-pin XLR
socket. When changing to this menu item, the following options are available:
Manual
→
DMX
→
Remote.
The socket is deactivated in manual mode. The device can only be using started the
trigger button.
In DMX mode, the socket is used to receive a DMX-512 telegram. Furthermore, the
Pi cc ola is RDM capable, so the DMX address can also be using an RDM changed
capable lighting console. A firmware update via RDM is also possible.
In remote mode, the Pi cc ola can be using triggered wired remote control or a radio
remote control.
If a mode other than manual is selected, the main menu is expanded to include the
corresponding sub-items.
9