www.haze
base
.com
7
English
4.Operating the base•low•pro
4.1 Overview operating modes
The following diagram illustrates the different operating modes of the base•low•pro. These are described in
detail in the following chapters. The manual mode is overwritten by any other . Operation via Ethernet overri-
des everything else and therefore is in the picture at the top.
After turning on the base•low•pro the hazebase logo appears on the display ( B ). The following figure shows
the main menu of the base•low•pro.
L) Display analog input: show the selected mode and
current voltage.
P) Ethernet display: shows which protocol is selected
and whether the base•low•pro is controlled per
over Ethernet.
M) Current CO
2
consumption base•low•pro
Q) Current output values of fog , air and CO
2
via you
can change this via MODIFY. (See section 4.2)
N) RESET value of (M) when a new bottle was atta-
ched. This is only a guideline.
R and S) Selection of PRESET in manual mode
O)
Display DMX : indicates whether DMX is active
and which address is selected.
T) Open the settings menu
U) Manual start of the fogging process
4.5 Operation via Ethernet
4.4 Operation via Analog
4.3 Operation via DMX
4.2 manual mode
L
M
R
T
O
P
N
Q
S
U
