background image

www.haze

base

.com

3

English

1. Introduction

The base•low•pro from hazebase is a CO

2

 low fogger like no other. Create amazing low lying fog when used 

with either the hazebase base•highpower  foggers.

2. Safety Instructions

 A fog machine is not a toy!

Damages are apparent by improper use or non-compliance with the operating instructions in their own 

responsibility of the user. Structural changes to safety-critical components on the machine are strictly prohi-

bited. If you open the appliance yourself, so the manufacturers warranty void. Please also see the attached 

warnings and instructions on the device. Use of other fluids will void the warranty on the parts that come into 

contact directly with the fluid.

2.1 Scalding Hazard and General Safety

•  Very hot steam escapes from the nozzle. Danger of getting burnt.  Occasionally very hot droplets of fluid 

may escape when in operation. Thus never aim at persons directly and keep a minimum distance of 3 m 

to the nozzle.

•  Never touch the nozzle when in operation. Danger of getting burnt.

•  The location for the machine must be non-flammable, non-combustible and not sensitive to heat. It has to 

be twice as big as the machine.

•  Keep a minimum distance of 60 cm to all flammable, combustible objects and objects sensitive to heat.

•  Glycol is a chemical alcohol and burns with a slightly bluish, almost invisible flame. Never point the fog at 

strong sources of ignition like fire or pyrotechnic effects.

•  During operation small amounts of hot fluid-drops may emerge Therefore you should make sure, that 

these do not become a danger to anyone.

•  Do not swallow the fog fluid. Keep it away from children. In case of eye contact, rinse with a lot of water. 

Consult a doctor should you have accidentally swallowed some fluid.

•  Never open the machine and leave the machine unattended when connected to a power supply.

•  The visibility has to be more than 2 m in rooms where people walk around.

• 

Fog may activate smoke detectors.

•  Spilled fluid or splashed fluid droplets can cause slip hazard. Mop up the fluid and dispose of it according 

to regulations. hazebase fog liquid is an enviromentally safe product and it can be recycled biologically.

Artificially-made fog can be produced in many different ways. The method used here to produce fog, with a 

device which works according to the vaporizer principle, is the most harmless one. No case has so far been 

reported in which a human being has been harmed because of using our device to produce artificial fog. Ho-

wever, this can only be guaranteed if the professional fog generators are used accordingly, i.e. at the correct 

vaporization temperatures as well as with the correctly mixed fog fluid.

We recommend: People with health problems or problems of the respiratory tract or with 

an inclination for allergies should avoid any contact with artificially-made fog!

Содержание Base Low Pro



















Отзывы: