How To: Connect to Wi-Fi (cont.)
12
If the password was accepted, press the check
mark. If not, go back and verify credentials.
The following table outlines a description of each test, conducted by the Network Diagnostics. A failure of any of
these items will provide additional troubleshooting steps.
Step 6
Step 5
The network diagnostic tool will check for possible connection issues.
A network diagnostics test will run, if all green
check marks appear press the back button.
Test
Description
Verifying Netlink
Confirms network password acceptance
Verifying Network Address
Verifies the Controller has an IP credentials (supplied by
router)
Verifying Network Connection
Confirms the router is communicating
Verifying DNS
Conducts a web test (pings a webpage)
Verifying Internet Connection
Verifies connection with the OmniLogic Web Server
Step 6b
