Hayward Viio Turbo 5500TC Скачать руководство пользователя страница 16

15

Use Only Genuine Hayward Replacement Parts.

Replacing Parts

Sweep Hose

• Sweep Hose Wear Rollers will experience wear when

operating in a plastered or concrete pool.

• When the Wear Rollers wear-down to the outer groove (Wear

Line) replace the Wear Rollers (P/N AX5006A).

• Check the Sweep Hose for holes.

Some parts will wear with normal use. To insure the high
quality performance, insist on 

Genuine Hayward

replacement parts (using non-Hayward replacement
parts will Void the Viio Cleaner’s Warranty).

The following parts are user replaceable and subject to 
normal wear and tear.

1.

Sweep Hose:

If a hole forms in the Sweep Hose, it

should be replaced. Unscrew the mender nut from the
hose and pull the Sweep Hose off the Cleaner Connector.
Attach a new Sweep Hose to the Cleaner Connector.
(Replacement Part Number: AX6000RSHA)

2.

Debris Bag:

The Debris Bag should be replaced if it 

is torn.
(Replacement Part Number: AX5500BFA)

3.

Swivels:

If a swivel ceases to turn easily or leaks while

the cleaner is running, it should be replaced.
(3-Pack Replacement Part Number: AX5000SA) 

Storing the Viio Cleaner

1.

Turn the Booster Pump OFF 

and set the timer so the

Booster Pump will not turn on while the Viio cleaner is out
of the pool (

Never

operate the Booster Pump without the

cleaner connected).

2.

Disconnect Wall Quick Connect from the Universal Wall
Fitting. The Universal Wall Fitting may be left in place.

3.

The cleaner is constructed of the finest materials
available, however we recommend that when the Viio
cleaner is removed from the pool, it should be stored flat
on its wheels in a shaded area to protect the unit from
excessive exposure to ultraviolet solar rays.

4.

Store the Sweep and Pressure Hoses straight and flat,

not coiled

. If possible, store the hoses in the shade.

Winterizing the Cleaner

When closing your pool for the winter completely drain the
water from the Viio Cleaner (by slowly rotating it in all
directions) and Hoses. Store the Viio Cleaner indoors to

prevent freezing the inner mechanisms.

Periodic Freezing Conditions

If you are in an area subject to periodic freezing conditions, but
pool equipment is kept in operation, it is very important that
the filtration system and Viio cleaner be in operation during
times when hard freezing occurs (normally between 3AM and
7AM). Running the Viio cleaner at this time will insure against
damaging the Cleaner and may prevent freezing of pool water.

Wear Roller

Wear Line
(outer groove)

Содержание Viio Turbo 5500TC























Отзывы: