FILTERING
Filtration starts as soon as flow is steady through the
filter. As the filter cartridge removes dirt from the pool
water, the accumulated dirt causes a resistance to flow.
As a result, pressure will rise and the flow will decrease.
When flow decreases below desired rate, clean or replace
the filter cartridge.
CLEAN/REPLACE CARTRIDGE
Removing Cartridge Element
Shut off the pump.
Block off suction and discharge lines (close valves if
used) to prevent back flow of water from pool.
Open top air relief valve and remove drain valve to
allow water to drain from filter.
Unscrew union nut, freeing filter from rigid union
connection.
Hold filter head firmly and unscrew filter housing to
remove. If difficult to unscrew, apply a lever between
the two tab extensions on the bottom of the filter
housing and apply a slight pressure to assist in
freeing the thread seal. Or, apply optional S200KT
wrench (if supplied) to bottom side tabs.
Remove cartridge element and clean. Or, replace
with clean, spare cartridge. (See Cleaning Cartridge)
1.
2.
3.
4.
5.
6.
PARTS
Model C2001540LS
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
1
1
2
1
1
1
1
1
2
2
---
CX120AA
CX120D
CX200RE
CX120B
ECX1321A
SPX1485C
SPX14858PAK
SP1540CLS
SPX1500WA
ECX12891
ECX1108
ECX1109
S200KT
Filter Head
O-Ring
Cartridge Element -
20 sq. ft.
Filter Body Housing
Air Relief Valve
with O-Ring
Gasket
Threaded Elbow
Union Assembly
Power-Flo LX Pump
6 Ft. Cord Set
Mounting Base
Mounting Screw
Washer
Wrench Tool for Body
(optional)
PART NO.
DESCRIPTION
REF.
NO
NO.
REQ’D.
NOTE; ANSI/NSPI-4 Article V, standard for above-ground and on-ground pools,
advises that components such as the filtration system, pumps and heater be
positioned so as to prevent their being used as a means of access to the pool
by young children.
Содержание Micro Star-Clear
Страница 4: ... 1999 Hayward Printed in U S A Rev 4 99 A ...
