background image

KingShark2

7

SPECIFICATIONS

MOTOR:

Type ...................................................................... Submersible
Voltage .................................................................. 110/115 Volts ................................ 230/240 Volts
Frequency ............................................................. 60 Cycle  ...........................................60/50 Cycle
Speed .................................................................... 1725 RPM ..........................................1425 RPM
Bearing .................................................................. Ball Bearings
Housing ................................................................. Aluminum Anodized
Motor Seals ........................................................... Double Lip Wave
Overload Protection .............................................. Thermal Overload
Electrical Cord ....................................................... #16 Wire Encased in Flotation Jacket; 150' in length

DRIVE:

Rear Wheel Drive  ................................................. Planetary Gear System
Front Wheel Driven by .......................................... Continuous Belt

FILTER: 

Type ...................................................................... Self Contained
Filter Media ........................................................... Corrugated Resin Impregnated Element
Porosity ................................................................. 50 Microns
Filter Area .............................................................. 40 Square Feet
Housing ................................................................. Molded Plastic
Gallons Circulated ................................................. 70-75 Per Minute/4200-4500 Per Hour

SHAFT and AXLE:

All parts such as axle, shafts, pins, fasteners, rods, etc., are corrosion resistant.

(KingShark2) SPECIFICATIONS WITHOUT SWIVEL

 

UNIT DIMENSIONS 

UNIT WEIGHT 

UNIT CORD LENGTH 

 

Height       15 in. (38.1 cm) 

86.5 lbs. (39.2 Kg) 

150 ft. (45.7m)

 

Width         24 in. (60.0 cm)

 

Length       29 in. (73.6 cm)

(KingShark2) SPECIFICATIONS WITH SWIVEL

 

UNIT DIMENSIONS 

UNIT WEIGHT 

UNIT CORD LENGTH 

 

Height       19.5 in. (49.5cm)  

89.0 (40.5 Kg) 

150 ft. (45.7m)

 

Width         24 in. (60.0 cm)

 Length     29 in. (73.6 cm)

(KingShark2) W/BOX SPECIFICATIONS

 

UNIT BOX DIMENSIONS 

UNIT BOX WEIGHT 

UNIT BOX VOLUME

 

Height      19.5 in. (49.5 cm)  

105 lbs. (47.6 Kg) 

9.38 ft

 (.3m

3

)

   W/Swivel     23.5 in. (59.7 cm) 

 

 

Width       26.0 in. (66.0 cm) 

109 lbs. (49.4 Kg) 

11.31 ft

 (.36m

3

 

Length     32.0 in. (81.3 cm) 

w/optional Swivel 

w/optional Swivel

CADDY CART W/BOX SPECIFICATIONS

 

CART BOX DIMENSIONS 

CADDY CART WEIGHT 

CART BOX VOLUME

 

Height        12.5 in. (31.8 cm) 

16.5 lbs. (7.5 Kg) 

6.92 ft

3

 (0.2m

3

)

 

Width         22.5 in. (57.2 cm) 

WITH BOX

 

Length     42.5 in. (107.0 cm) 

29.0 lbs. (13.2 kg)

 

 

 

 

 

EXPORT ONLY

Содержание KingShark





















Отзывы: