Hayward HLXPROUPG, Руководство по эксплуатации, Страница: 27 / 40

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
24
Config
The Config button offers many options related to the configuration and operation of the Omni. You can view log files, backup configuration settings, restore
configuration settings, modify display settings and more.
Using a USB Thumb Drive
Some options require the use of a USB thumb drive (removable media) that will be inserted in the OmniPL’s Control Pad. If logging is desired (page 26), the
thumb drive should be left in the OmniPL during normal operation. This connection is not waterproof so care must be taken to protect the Control Pad while
logging. The location of the USB port is shown in the Installation Manual.
Config Wizard
The Configuration Wizard is used to add, remove and configure pool equipment that is controlled by the Omni. This has already been done at installation and
should not be needed unless a change has been made to the system. If a new configuration is saved, it will overwrite the old configuration and may require
you to change previous equipment settings.
If pool equipment is added or removed from your system you may edit the existing Configuration. Two types of editing are available; Full Edit and Quick Edit. A
Full Edit will walk you through each step of the Configuration Wizard and allow you to save at the end. Refer to the Configuration Wizard Guide in the Installation
Manual when using a Full Edit. A Quick Edit allows you to go directly to the equipment that you’d like to add/remove/configure. In most cases, Quick Edit will
offer the most convenient way to make these changes. For more information, refer to the Quick Edit Guide section in the Installation Manual.
IMPORTANT: Existing themes are affected when new equipment is added. To ensure proper operation, delete and then re-create any existing Themes after
adding new equipment regardless of whether the new equipment is used within the Theme.
System Info
System Info will show the Hayward Unique Address (HUA) and version for all smart components (components that communicate with the Omni). This may be
needed by Hayward Technical Service when troubleshooting or diagnosing system issues.
Backup
You can back up your configuration settings, schedules, setpoints etc. to the OmniPL’s internal memory or to a USB thumb drive. If using a thumb drive, use the
instructions for inserting and removing thumb drives as explained above.
config
themes
º
F
air
71º F
90
SPA
SYSTEM
configuration
1 / 2
config wizard
system info
backup
restore
display
network
date/time
language