Hayward HLXPROUPG, Руководство по эксплуатации, Страница: 20 / 40

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
17
Deleting Alarms
For Alarms that can be manually deleted, follow the procedure below.
Upgrading Firmware (Omni products using firmware 4.0.0 or greater)
All firmware upgrades are initiated from Service Mode. If you receive an alarm that upgrades are available, selecting the alarm will give you the option to delete
the alert or start the upgrade (you can also ignore the alert and wait for a more convenient time). If you choose to start the upgrade process, you’ll be warned
that the OmniPL must go into Service Mode and will temporarily pause operation during this time. The upgrade procedure is shown on page 28 under “Upgrade
from Internet”.
Daylight
Daylight is another button that will appear in Favorites by default. This button is used to change the screen contrast for better viewing in bright sunshine. Touch-
ing this button will toggle Daylight viewing on and off.
Features/Lights/Heaters/Backyard
These four buttons function similarly. If any water feature, light, heater or backyard accessory has been configured in the Configuration Wizard, a Features,
Lights, Heaters and/or Backyard button will appear in Favorites. These buttons give you quick access to the Control Screens for all related pool equipment.
These are the same Control Screens that you’ve used in the Body of Water Features and Controls Screen section of this manual. For Features, Lights and Heat-
ers you can display the equipment based on a particular Body of Water or from all Bodies of Water as shown below.
features
alarm themes
º
F
air
71º F
90
SPA
daylight
daylight favorites
alarm lights
º
F
air
71º F
82
ALARM
alarm list
Alarm
CS&D pH High level
CHLOR Low Salt
AUTO
AUTO
pH Timeout