9
INSTALLATION
Installation must be performed in accordance with Local and NEC codes.
{Diagram}
Preparing Pool/Spa Water
Refer to page 1 for recommended chemical levels. The pool's chemistry must be balanced BEFORE
activating the
AquaRite CUL Electrolytic Chlorine Generato
r
. NOTE: If the pool does not have new water,
add 1 liter (1 quart) of metal remover and 1 liter (1 quart) of non-copper based algaecide to the pool, per
manufacturer’s instructions. This ensures a quick, trouble free transfer to the AquaRite CUL Electrolytic
Chlorine Generator system.
Mounting the AquaRite CUL Electrolytic Chlorine Generator Control
The
AquaRite CUL Electrolytic Chlorine Generato
r
is contained in a raintight enclosure that is suitable for
outdoor mounting. The control must be mounted a minimum of 2 meters (5 ft.) horizontal distance (or
more, if local codes require) from the pool/spa.
The control is designed to mount vertically on a flat surface with the knockouts facing downward. Because
the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not to block the
four sides of the control. Do not mount
AquaRite CUL Electrolytic Chlorine Generato
r
inside a panel or
tight enclosed area.
