Cleaner Hose Coiling
• The hoses may have been stored in a coiled position. Lay them straight in the
sunlight. If that doesn't work, replace that section of hose.
• Dirt in the swivel cone. (Swivel on the head of the cleaner). Although the swivel is
self
‐
cleaning there may be excessive debris. Remove any debris. It is helpful to
place the swivel under a running tap while twisting to clean.
• Leaf Canister in wrong place. If using a leaf canister, make sure it’s located between
the 1
st
and 2
nd
hose sections from the pool wall.
• Leader hose is kinked. If the cleaner was put on the deck with the hoses attached to
it, then the leader hose may have a kink in it.
• Wheel hub (PVX051-236) and/or Large Drive Gear (PVXH007) and/or Steering
Bracket Roller Assembly (PVXH011SA) and/or Shaft Bearing Assembly
(PVXH019SA) worn or damaged
Right Wheel Skips When Turned By
Hand
• Wheel Hub (PVX051-236) and/or Shaft Bearing Assembly (PVXH019SA) may be
worn or damaged.
Page 10
