Cleaner Does Not Move
• The pump may be turned off or on low speed. Make sure the pump is ON.
• The three way valve may be in the wrong position. If you have a designated suction port,
divert suction away from your skimmers or main
‐
drains to the suction port. If you are using
the skimmer, divert suction away from the main
‐
drain to the skimmer.
• The system may be dirty. The filter may be dirty, and or the skimmer baskets
may be full. Clean and backwash the filter, clean the pump strainer basket.
• The pump may not be primed. Make sure the pump is primed.
• You may have a suction leak. Check for leaks in the system. (Bubbles in the returning
water). Fix the leak. Usually O
‐
ring on pump lid, water level too low, or plumbing leak.
• Make sure the vacuum hose is free from debris and leaks.
• Check if pump impeller is blocked
• Obstruction in the cleaner itself.
• Turbine vanes in the cleaner are in the wrong direction. Make sure the turbine vanes are in
the right direction.
Page 8
