Hayear HY-1080, Руководство пользователя

Страница: 15 / 22

1. You can adjust the Settings for photo and video resolution, white balance, exposure and so on. The image below is
the default resolution.
HDMI output
First, make sure the connected monitor is hd monitor, otherwise the resolution can not reach 1080P
Second, power on the microscope and connect it to the hd monitor, make sure there is power on when using
since there is no built-in battery.
Third, turn on the microscope, put the observation on the platform and adjust the working distance, the video
signal will switch when you connect the microscope to other device, therefore the screen itself can not work
under the HDMI output.
Under the HDMI output, the microscope can take picture, but can not record video.
FAQ
1. Why these is no image on the monitor?
Check if all the lines connected properly and power switch is turn on.
2. Why the image vague?
Please adjust the focal distance, lighting angle, check if there is dirt on the lens.
3. Why the remote control can not work?
There is no battery in the package, check if you has installed it.
4. Why there is no image on monitor when playback?
Maybe the video is not kept intact, or the video file is too large, and the system needs run time.
5. Why isn't the photograph clear?
Please check whether the photo setting is the highest pixel.
6. Why it shows the TF card error?
First make sure it is a certified memory card, then format it and try again.