12
• Avoid wearing clothing that is loose fitting or that has hanging
cords or ties.
• Only operate the machine in open space (e.g. not close to a wall
or other fixed object) and on a firm, level surface.
• Do not operate the machine on a paved or gravel surface where
ejected material could cause injury.
• Before starting the machine, check that all screws, nuts, bolts,
and other fasteners are properly secured and that guards and
screens are in place. Replace damaged or unreadable labels.
Operation
• Before starting the machine, look into the feeding funnel
chamber to make certain that it is empty.
• Keep your face and body away from the feed intake opening.
• Do not allow hands or any other part of the body or clothing
inside the feeding chamber, discharge chute, or near any
moving part.
• Keep proper balance and footing at all times. Do not overreach.
Never stand at a higher level than the base of the machine when
feeding material into it.
• Always stand clear of the discharge zone when operating this
machine.
• When feeding material into the machine be extremely careful
that pieces of metal, rocks, bottles, cans or other foreign
objects are not included.
• If the cutting mechanism strikes any foreign objects or if the
machine should start making any unusual noise or vibration,
shut off the power source and allow the machine to stop.
Disconnect from mains supply and take the following steps:
- Inspect for damage.
- Check for and tighten any loose parts.
