Hawkins Futura Nonstick Dosa Tava Griddle, Инструкция по эксплуатации

Страница: 5 / 20

Avoid Scratching, Damage, Breakage
Use wooden, heat-resistant nylon, plastic or rubber spatula/utensils.
Metal utensils will scratch and reduce the life of the nonstick coating.
Do not cut or scrape with metal objects or knives. If using a metal
spatula, try to keep spatula parallel to the tava to avoid digging into the
coating. Try to touch the food and minimise contact with the coating.
Do not leave plastic, nylon or rubber utensils on tava while it is hot.
Do not hit the tava or bang its rim. Do not bang tava down on pan
supports. Lift tava from the pan supports – do not drag it across the
pan supports. When storing the tava ensure that the nonstick coating is
not gouged or rubbed against any hard or sharp surface. Do not stack
other utensils on the coating without protecting it. Do not place heavy
objects on tava to avoid warping. The plastic handle is liable to break
under a sharp or forceful blow.
Do not use the tava for any purposes other than cooking in the
manner described in this Manual.
After use, faint scratches or marks may appear on the nonstick
coating. These are marks of normal wear and tear and do not affect
the performance of the coating. Even if some of the coating is scraped
off, the tava is still safe to use. The coating is non-toxic and inert; if
accidentally and unknowingly ingested, it passes through the body
harmlessly.
Saving Energy
The instructions given in this Manual for regulating heat in order to
protect your tava and produce tasty food will also optimise fuel
consumption.
3
Flour turns
dark brown in
15 seconds or
less?
Tava is… Action needed
A. Yes Overheated 1.
Remove tava from heat at
once.
2.
Reduce heat setting.
3.
Try from
Step 1
again
when tava has cooled.
B. No Not 1.
Continue heating tava.
overheated
Repeat flour test at
1 minute intervals. If flour
turns dark brown in
15 seconds or less, tava
is overheated: follow
action as per
A
.
2.
If flour does not turn dark
brown in 15 seconds or
less, stop test at 7 minutes
(the maximum pre-heating
time on medium heat). The
heat setting is all right for
pre-heating.