Hawking HomeRemote HRNC1, Руководство пользователя

Страница: 58 / 73

58
Change IP Address
IP Address
Enter an unused IP Address within the IP address range used on your
LAN. If the IP Address range of your LAN is between 192.168.1.1 and
192.168.1.254, you can set an unused IP Address from within this
range for the camera. For example: 192.168.2.231.
Subnet Mask The Subnet Mask field must match the subnet setting on your LAN. For
example: 255.255.255.0.
Gateway The Gateway is used to forward frames to destinations in a different
subnet on the Internet. The Gateway setting must be the same as the
gateway used by the PCs on your LAN.
DNS Server A DNS Server (Domain Name Server) translates names to IP addresses.
Set the same DNS Server as the PCs on your LAN.
Video Port The Video Port is used to transmit or receive the streaming video over
the network. The default port setting is “5000”. If you want to view the
video from the camera, the port setting must be correct.
Web Port This camera supports web connection. The default web port is 85. If
you choose to access the camera via its IP address (instead of through
the HomeRemote Gateway, which is the recommended method), you
must type the port number after the IP address. For example, if you set
the web port to 87, you would type the following in the web address bar
to connect to the camera:
http://192.168.2.231:87 .
Apply When you finish in the “Change IP Address” section, click “Apply”.