background image

111 

6-3 Glossary 

Default Gateway (Access point): 

Every non-access point IP device needs to configure a 

default gateway’s IP address. When the device sends out an IP packet, if the destination is 

not on the same network, the device has to send the packet to its default gateway, which 

will then send it out towards the destination. 

DHCP: 

Dynamic Host Configuration Protocol. This protocol automatically gives every 

computer on your home network an IP address.

 

DNS Server IP Address: 

DNS stands for Domain Name System, which allows Internet 

servers to have a domain name (such as www.Broadbandaccess point.com) and one or 

more IP addresses (such as 192.34.45.8). A DNS server keeps a database of Internet 

servers and their respective domain names and IP addresses, so that when a domain name 

is requested (as in typing "Broadbandaccess point.com" into your Internet browser), the 

user is sent to the proper IP address. The DNS server IP address used by the computers 

on your home network is the location of the DNS server your ISP has assigned to you. 

 

DSL Modem: 

DSL stands for Digital Subscriber Line. A DSL modem uses your existing 

phone lines to transmit data at high speeds. 

 

Ethernet: 

A standard for computer networks. Ethernet networks are connected by special 

cables and hubs, and move data around at up to 10/100 million bits per second (Mbps).   

Idle Timeout:

 Idle Timeout is designed so that after there is no traffic to the Internet for a 

pre-configured amount of time, the connection will automatically be disconnected. 

 

IP Address and Network (Subnet) Mask: 

IP stands for Internet Protocol. An IP address 

consists of a series of four numbers separated by periods, which identifies a single, 

unique Internet computer host in an IP network. Example: 192.168.1.254. It consists of 2 

portions: the IP network address, and the host identifier. 

 

The IP address is a 32-bit binary pattern, which can be represented as four cascaded 
decimal numbers separated by “.”: aaa.aaa.aaa.aaa, where each “aaa” can be anything 
from 000 to 255, or as four cascaded binary numbers separated by “.”: 
bbbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb, where each “b” can either be 0 or 1. 

A network mask is also a 32-bit binary pattern, and consists of consecutive leading 

Содержание HOD45B




















































































































Отзывы: