69
3-4-1-3 AP Bridge-Point to Point
Similar to station-infrastructure, this requires two HOD45B’s on each end. This will
create a wireless bridge between these two points. No WiFi signal will be broadcast and
it will only make a wireless connection between those two points.
Band (2):
Select the band you want to use, the two HOD45B’s must use the
same setting. Refer to 3-4-1-1 for definitions.
Channel Number (3):
Select the channel you want to use, the two wireless
HOD45Bs must use the same setting.
MAC Address (4):
Input the MAC address of another HOD45B
Security Settings (5):
Click to setting security for this connection
(Please go to section ‘3-4-3 Wireless Security’
for detailed instructions).
NOTE: Two HOD45B’s must use the same mode, band, channel
number, and security setting!
2
3
4
5
Содержание HOD45B
