Hawking HMPS1U, Руководство пользователя

Страница: 11 / 37

10
3.2.3 Methods for Setting the IP Address
You can set the IP address of your Server using one of the following methods,
depending on your network operating environment:

Automatic IP Address Assignment

Manual IP Address Assignment
3.2.4 Server Names and Server Name Rules
The default server name of the Server is “ HMPS1U ”. If you put two or more
Servers in your local area network, to avoid using the same server names
you have to change the server names by using the setup software or the
server’s web pages. If your server name is longer than 15 characters, the
server uses only the first 15 characters.
3.2.5 Setting the IP Address Using DHCP
Follow the instructions below to get an IP address using DHCP:
1. Edit or create a scope in the DHCP manager of the DHCP daemon. The
entries included in this scope should contain the following parameters:

range of IP addresses

subnet mask

default router IP address

DNS server IP address

lease duration
2. Activate the scope. The Server automatically gets the DHCP
parameters. If you are using DNS, you may include at least one DNS
server IP address in the DHCP scope or manually set the DNS server IP
address using Server’s web pages or the HMPS1u’s setup software.
3.2.6 Setting the IP Address Using the HMPS1u Software
1.
Install the Setup Software. The Setup Software is available on the
Product CD.
2.
Start the Hawking Print Server software window will appear. It will
appear until Start, Programs, Hawking, Multifunction Print Server