Hawking HAW2DR, Руководство пользователя

Страница: 39 / 135

32
3-1-3 Remote Management
This Smart Dish Repeater by default does not allow management access from the Internet
in order to prevent possible security risks. However, you can still manage this Smart
Dish Repeater from a specific IP address by enabling the “Remote Management”
Function.
To do so, please follow these instructions:
Click the “General Setup” tab at top of web management interface, then click “Remote
Management” from the menu on the left and the following message will be displayed on
your web browser:
Host Address (1): Input the IP address of the remote host you wish to initiate a
management access.
Port (2): Define the port number that the Smart Dish Repeater will
receive incoming requests from. If you are providing a web
service (default port number is 80), you should try to use other
port number. You can use the default port setting ‘8080’, or
something like ‘32245’ or ‘1429’. (Any integer between 1 and
65534)
Enabled (3): Select the field to start the configuration.
1
2 3