Hawke 46101, Руководство пользователя

Страница: 10 / 85

10
Working Mode
Working mode is used to set the camera’s activation to PIR (motion detection), time-lapse or a
combination of both. PIR : The camera works on PIR activation. Time Lapse : The camera takes an
image at certain intervals of time. The interval time ranges from 1 minute to 24 hours. Both : The
camera uses both PIR and time-lapse modes. SETTINGS – Basic (default) – Working Mode – Use
the left and right arrows to move between PIR , Time Lapse and Both – Press “OK” to confirm.
If you select Time Lapse or Both , you can set the time lapse interval using the TL Interval setting
in the Advance menu (can be set from 1 minute to 24 hours).
SETTINGS: PHOTO
Day Photo Size
Sets the image quality for photos captured in daylight from 5MP, 8MP or 14MP.
SETTINGS –
Photo – Day Photo Size – Use the left and right arrows to move between 5MP , 8MP and 14MP
– Press “OK” to confirm.
Day Photo Num (Burst)
Captures a burst of images every time the camera is triggered. SETTINGS – Photo –
Day Photo
Num – Use the up and down arrows to move from 1P (1 image) to 10P (10 images) – Press “OK”
to confirm.