Hawk HA-FM11, Руководство пользователя, Страница: 29 / 40

(6) Timed remote engine start. (Programmable)
The system has the programable function to timed remote start engine, pre-set
it from the remote, for preheating the engine. For details, please check the
section 7 of (the instruction of icon setting > Such as, it pre-set the time of 8:00
while the real time is 7:30 that the engine would Auto start in 8:00. And also, if
the real time is: 7:30, it pre-set the time of 7:30, that would be started after
24 hours.
Attention: If the car does not satisfy remote engine start conditions, then
engine would not start.
Important! It is unsafe to operate a vehicle’s motor in a garage or
other closed off area. Breathing the exhaust from the vehicle is
hazardous to your health. Never activate the remote start in an
enclosed space.
Chapter 9: Alarming function:
1. Shock sensor alarm (programmable)
In arm status, if shock sensor activated, siren will “du du” 10 times (no sound
if car in mute arm status), direction light flash, transmitter will “di di” sound,
icon
+ flash; If shock sensor activate again in 15 seconds, siren sound
25 seconds (no sound if car in mute arm status), direction light flash, LCD
transmitter sound “wu wu wu” alarm sound and vibrate,
+ icon flash.
Shock sensor alarm function will invalid if in the status below:
(1) In arm status, if trunk release, shock sensor function will disable 10 minute,
shock sensor function will enable automatically after closing trunk and press
button.
(2) Avoid false triggering of shock sensor. About detail, please check <<icon
program function >> We can set the shock sensor function with transmitter,
select the icon , press
(add) button or (minus), digital
1
means weak
shock function, digital 2 means disable the shock function totally. If need shock
sensor, press , if no need, press . If disabled shock sensor, the icon will
keep shown in screen.
HA-FM11 manualv3_p21-40_Layout 1 15/08/2016 19:06 Page 9