6
Warning
●
The operators who will do the endoscopic surgery with medical pressurizer must be
trained and qualified. Forbid unqualified personnel to use this equipment.
●
This device must be installed, used, operated and maintained by or under supervision
the person who is properly trained and qualified.
●
It should has reliable grounding with the power supply socket to control unit. The
power grid connected to the operating room must be grounded reliably, or doctors and
patients would result in injury.
Note
●
Keep the User’s Manual in a place easily accessible at all times for persons operating
and maintaining the equipment.
●
The manufacturer is only responsible of the safety, reliability and performance of the
device:
1) Electrical installation should be done in accordance with the provisions described in
this user manual.
2) This device should be installed, used, operated and maintained in accordance with
this user manual.
●
Please do not use this device if it is suspected to have problems. Please contact
HAWK designated service providers and check the device before use. If any deficiency
is suspected or confirmed in the device, do not use the device until it has been checked
by the authorized service.
●
Do not disassemble other parts by unauthorized person except the parts permitted by
this operation manual. The maintenance of this device should be done in accordance
with this user manual.Any additional maintenance and modification should be done only
by HAWK service technicians or authorized personnel.
●
Do not modify this device without any authorization. The manufacturer is not liable for
damage caused by unauthorized tampering with the device(s). Such tampering will make
customer forfeit any rights to claim under warranty.
●
This equipment may only be used together with accessories supplied by HAWK. If the
customer makes use of other brand accessories, use them only if their safe usability
under technical safety aspects has been proved and confirmed by HAWK or the
manufacturer of the accessory.
●
Before insert plug into socket,it should check the plug is match the socket, do not force
to insert the plug into the socket. Do not pull the cable when turn off the power supply,
it should hold the plug and pull it out .
●
Do not force cable connections. If a cable does not connect easily, be sure that the
connector (plug) is appropriate for the receptacle(socket). If you cause any damage to a
cable connector(s) or receptacle(s), let the damage(s) be repaired by an authorized
service technician.
●
Don’t plug the AC power cord into the outlet before the connection between devices of
the equipment is completed which can generate the defect.
●
Before every operation, visually check the equipment for exterior mechanical
damaged(s) and for proper function.
