MPS3004 / RS4004 AUDIO SYSTEMS
INSTALLATION GUIDE
HAWG WIRED
PAGE 12
NEWARK, CA
U
U
S
S
E
E
R
R
G
G
U
U
I
I
D
D
E
E
[
[
C
C
O
O
N
N
T
T
I
I
N
N
U
U
E
E
D
D
]
]
CONNECTORS DEFINED
LOW LEVEL INPUT CONNECTOR(S):
THIS CONNECTOR ALLOWS THE AMPLIFIER TO USE INDUSTRY STANDARD RCA OUTPUTS FROM AN
AFTERMARKET SOURCE UNIT AS INPUTS TO THE AMPLIFIER. THIS IS THE PREFERRED METHOD WHEN
RCA OUTPUTS ARE AVAILABLE, AND WILL PRODUCE THE CLEANEST SOURCE SIGNAL TO THE
AMPLIFIER. IF YOU ARE INSTALLING A 4 CHANNEL SYSTEM ON A 4 CHANNEL SOURCE UNIT, BOTH
THE FRONT AND REAR LOW LEVEL INPUT CABLES ARE IDENTICAL, SO IT DOESN’T MATTER WHICH
ONE YOU USE FOR FRONT OR REAR; THE CONNECTIONS ARE THE SAME.
NOTE: WE USE INDUSTRY STANDARD 3.5MM HEADPHONE STYLE JACKS ON THE AMPLIFIER DUE TO THE SPACE
CONSTRAINTS (2 3.5MM PHONO-JACKS ARE A LOT SMALLER THAN 4 RCA JACKS). ALTHOUGH WE HIGHLY
RECOMMEND USING THE LOW LEVEL INPUT CABLES WE SUPPLY WITH THE KIT, TECHNICALLY YOU SHOULD BE ABLE
TO UTILIZE ANY STANDARD RCA TO PHONO ADAPTER CABLE FOUND AT YOUR LOCAL ELECTRONIC STORE TO MAKE
THESE CONNECTIONS. IT’S OUR GOAL TO KEEP THINGS SIMPLE AND STANDARD IF AT ALL POSSIBLE.
REMOTE CONNECTOR:
THIS CONNECTOR IS USED TO CONNECT OUR REMOTE CONTROL MODULE.
CONTROL CONNECTORS:
THE CONTROL CONNECTORS ARE USED TO CONNECT THE SATELLITE AMPLIFIER TO THE MAIN
AMPLIFIER. THE PURPOSE OF THE MODULAR SATELLITE AMPLIFIER IS SIMPLE; TO GIVE YOU THE
ULTIMATE INSTALLATION FLEXIBILITY WITHOUT ONE GIANT BOX. IT’S HOW WE’RE ABLE TO FIT UP TO
4 CHANNELS IN AS SMALL A SPACE AS A BATWING FAIRING.
