HAWEKA RPV1300, Руководство по эксплуатации

Страница: 12 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
12
4.2 Installing the software in Windows
•
Close all open applications on the computer.
•
Insert the USB-Stick
(Fig. 4)
into the PC.
If the installation wizard does not start automatically, click
Start on the Windows task bar and then click Run.
Enter D:\rpv1300setup_1.04.004.exe, where D is the drive
letter of the USB-Stick.
•
Confirm the Windows security warning if necessary and
click Run.
•
Read the licence agreement and follow the instructions of
the installation wizard on screen.
(Fig. 5)
•
When the installation procedure has completed, the
RPV1300 software and the driver for the laser sensors
have been installed on the computer.
•
Remove the USB-Stick from the PC after installation.
4.3 Installing the laser driver
The driver for the laser sensor is automatically added to the
PC system during installation of the RPV1300 program
•
A Windows security information is displayed during
installation of the driver.
In this window, select
“Install this driver software anyway”
(Fig. 7)
•
When one or more laser sensors are connected to the free
USB ports on the USB hub of the PC after installation, the
new hardware is recognised and added to the system.
(Fig. 8)
(Fig. 4)
(Fig. 5)
(Fig. 7)
(Fig. 8)
(Fig. 6)