HAWEKA RPV1300, Руководство по эксплуатации

Страница: 21 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
21
Measurement recording
7.2 Selecting the wheel to be measured
Depending on the number of previously entered tyres
and the rim data a selection of the wheels to be
measured is now available.
The circle symbol on each vehicle wheel indicates the
current status.
(Fig. 36)
•
All possible wheel statuses between the individual
measuring procedures are graphically displayed in
the circle and described in the program.
(Fig. 37)
•
Select by clicking on the circle on the vehicle model.
•
Then click “ Next ”
A symbol for the wheel selection appears at the top right.
(Fig. 38)
When measuring of one wheel has completed the
program returns to this selection page so a new
wheel can be selected and a new measurement
started.
Click on “
Save ” (Fig. 39) to save the entire measurement
process after completing the task.
The measurement can later only be retrieved and
continued via the log.
The “
Print ” button (Fig. 40) allows the recorded data to be
printed on an installed printer as an individual log or as an
overview.
The control measurement can be used to measure the same
wheel again after matching (rotating the wheel on the rim).
See item 8.1 Control measurement on page 27.
(Fig. 36)
(Fig. 37)
(Fig. 38)
(Fig. 39)
(Fig. 40)
(Fig. 41)