HAWEKA AXIS 500, Руководство по эксплуатации

Страница: 28 / 52

Wheel Alignment AXIS500
AXIS500 Manual Instructions
26
Front Wheel Alignment
5.9 Relative Steering Angle (toe out on turns)
• Turn the steering wheel until the front wheels
are in „straight travelling position“. Both lasers
have to point at the same value on the
magnetic scale attached to the frame.
• Turn the measuring head until the spirit level
indicates a vertical line.
• Place the floor scales for setting of the 20°
wheel angle on the ground beside the front
wheel so that the laser point points at the zero
mark on the scale. The zero mark is the
intersecting point of the 0° line and the
„center line“ adjusting line.
• Turn the laser to the front and rear in the
range of the floor scale.
• Adjust the scale until the laser point travels
along the center line parallel to the wheel.
Observe the spirit level. The laser point has to
point at the zero line (center line)
(illustration 19).
• Repeat the procedure with the other wheel.
• Turn the left wheel to the left with the steering
wheel until the laser point points at 20°. While
doing so watch the laser spirit level: When the
laser point points at 20° the spirit level has to
indicate the vertical line.
• Also turn the laser on the right-hand wheel
until the spirit level indicates the vertical line
of the laser beam.
• Read the relative steering angle of the right
hand wheel and write down in test record.
• Repeat the measuring procedure with the left
wheel.
(
Illustration 20)
Example
:
The laser points at 20° at the left wheel (wheel
at the inner circle). The laser points at 17°30’
at the right wheel (wheel at the outer circle).
The relative steering angle at the right-hand
side amounts to 2°30’. Illustration 23
(Illustration 19)