HAWE Hydraulik HICON, Оригинальная инструкция по сборке

Страница: 14 / 27

5
Assembly and installation
Observe the following safety instructions additionally to the safety instructions in chapter For your
safety .
DAMAGE
Material damage due to mechanical damage
Protect the product from mechanical damage during assembly and installation, e.g. by padding.
5.1 Mechanical connection
DAMAGE
Property damage from incorrectly installed hydraulic system
►
Assembly by trained specialists only.
►
Ensure all labels and markings of the hydraulic system are easily visible and legible after assembly.
►
Check installation space/connection points for damage.
Add components which were not included in the scope of delivery (e.g. hydraulic uid). Use ltered
hydraulic uid (10 µm).
1. Place the hydraulic power pack in position in the higher-level machine.
2. Ensure all the fastening bores and hydraulic connections align correctly.
3. Attach the hydraulic power pack using the two M8 threads with a maximum torque of 18 Nm.
4. After a week of operating time at the latest, check the ttings.
5.2 Hydraulic connection
DAMAGE
Damage from connecting soiled components
Connecting soiled components may cause system failure and irreparable damage.
►
Clean the workspace before connecting the hydraulic system.
►
Clean hydraulic components before connecting the hydraulic system.
►
Only use hydraulic uid of sufcient grade.
DAMAGE
Damage to valves caused by air bubbles
The system to be connected must already be lled with hydraulic uid free of air bubbles before the
hydraulic power pack is connected. Air bubbles in the hydraulic uid cause damage to valves.
Connecting hydraulic hoses
Protective transport caps have been removed.
1. Connect the hose via thread H1/8".
✓
max. screw-in depth: 9.3 mm
✓
max. tightening torque: depending on connection material, max. 7 Nm
14/27 B 8543 - 10-2021 - 1.0 HAWE Hydraulik SE