www.havis.com • 1-800-524-9900
6
7
Installation
(continued)
OPTION B INSTALLATION:
A)
Align the Rigid Mount Bracket holes with the VESA 75mm holes on the
mounting device. Using the (4) M4 Pan Head Screws (Hardware Item 4),
(4) Washers, M4 (Hardware Item 5) and (4) Lock Washers, M4 (Hardware
Item 6) secure the Rigid Mount Bracket to the mounting device from
the rear. Torque screws to 20 in-lbs (2.3Nm) ± 10%.
OPTION C INSTALLATION:
A)
Using (2) fasteners appropriate for the mounting surface (not included),
secure the Rigid Mount Bracket through the access holes via the front of
Docking Station.
Docking
Station
M4 x 0.7x12mm
Pan Head
Screws
Mounting Device
(VESA 75 mm)
Lock Washer, M4
Washer, M4
Mounting Surface
appropriate fasteners
Access to Rigid Mount
Bracket via front of
Docking Station
Mounting Surface
hole pattern
(For reference only)
3.0”
Installation
1)
Identify your required mounting configuration and select the appropriate
fasteners from the Hardware Kit.
OPTION A:
Havis vehicle motion/mounting equipment.
Use Hardware Kit Item 3 (1/4-20x5/8” long Button Head Screws)
OPTION B:
Motion/mounting device with VESA 75mm hole pattern.
Use Hardware Kit Item 4 (M4 x 0.7x12mm long Pan Head Screw),
Hardware Kit Item 5 (Washers, M4), and Hardware Kit Item 6 (Lock Washers, M4)
OPTION C:
Other mounting surfaces without rear access.
Hardware not supplied, use appropriate hardware for preferred mounting surface.
OPTION A INSTALLATION:
A)
Using a 5/32” Hex Drive (not provided), remove the Rigid Mount Bracket from
the Docking Station by removing the four (4) 1/4-20 x 1/2” Button Head Screws
and set aside for use in Step C.
B)
Align the Rigid Mount Bracket holes with the holes on the mounting device.
Using the (4) 1/4-20 x 5/8” Button Head Screws (Hardware Kit Item 3), secure
the Rigid Mount Bracket to the mounting device. Torque screws to 80 in-lbs
(9.0Nm) ± 10%.
1/4-20 x 5/8”
Button Head
Screws
Rigid Mount
Bracket
Motion/Mounting
Device
Docking
Station
Mounting
Bracket
1/4-20 x 1/2”
Button Head
Screws
C)
Align the Docking Station Mounting Locations with the holes on the Rigid
Mount Bracket. Using the (4) 1/4-20 x 5/8” Button Head Screws (retained from
Step A), secure the Docking Station to the Rigid Mount Bracket. Torque screws
to 40 in-lbs (4.5Nm) ± 10%.
Docking
Station
1/4-20 x 1/2”
Button Head
Screws
Rigid Mount
Bracket
