Before Beginning
(Original Instructions)
2
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-GTC-7X0 Series Docking Station for
the Getac Z710 & ZX70 Rugged Tablets.
For questions regarding the set-up of your DS-GTC-7X0 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit
for additional
product support and information.
This Owner’s Manual applies to the following Part Numbers:
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILEDRIVING.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNINGINSTALLATION.
• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE,
STEAM, DUST, ETC. ARE PRESENT
• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR
UNDOCKING WITH YOUR COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES
CAN CAUSE PERMANENT DAMAGE.
• FOR THE DS-GTC-711, DS-GTC-711-2, DS-GTC-714, DS-GTC-714-2, DS-GTC-715,
DS-GTC-715-2 DOCKINGS STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE
source rated for a continuous, regulated 12DC output (Havis Part Number LPS-164 or
equivalent). Failure to comply with this requirement will cause product damage that is NOT
repairable and is NOT covered under warranty.
• FOR DS-GTC-703, DS-GTC-703-2, DS-GTC-716, DS-GTC-716-2 DOCKING STATIONS:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Getac Z710/ZX70 tablet
output. Failure to comply with this requirement will cause product damage that is NOT
repairable and is NOT covered under warranty.
• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY
REFER TO THE SUPPLIED GETAC POWER SUPPLY REFERENCE GUIDE.
• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN
0°C to 50°C (32°Fto 122°F).
PLEASE REFER TO GETAC Z710/ZX70 OWNER’S MANUAL FOR MORE INFORMATION.
DS-GTC-711
DS-GTC-711-2
DS-GTC-703
DS-GTC-703-2
DS-GTC-714
DS-GTC-714-2
DS-GTC-715
DS-GTC-715-2
DS-GTC-716
DS-GTC-716-2
DS-GTC-717
DS-GTC-717-2
DS-GTC-718
DS-GTC-718-2
