C-DMM-3015_INST_8-19
HARDWARE and PARTS:
QTY DESCRIPTION
PART#
1
Main upper mounting tray
CM009883
1
Lower
mounting support arm with stop
CM009809
1
Lower mounting foot
CM010066
1
VESA rotator plate
CM009068
1
PVC washer
CM008582
2
1/4" Nylock nut
GSM30016
2
1/4" Plastic flat washer
CM86600
2
1/4" Steel flat washer
GSM31005
2
10-32 x 3/4" Flat head screw
GSM33383
4
1/4" Serrated nut
GSM30023
5
10-32 Keps nut
GSM30028
2
#10 Flat washer
GSM31003
2
1/4” x 1/2" Carriage bolt
GSM31999
3
10-32 x 1/2" Phillips machine screws
GSM33118
2
M5 x 30mm Machine screw
GSM33792
2
1/4" plastic spacer
GSM34616
Notes:
1.
The C-DMM-3000 swivel plate accepts C-MM-301 offset bracket used with C-MM-2XX adaptors.
2.
C-MM-2XX series adaptor brackets are not needed for most VESA 75 and other Havis Docking
Station mounting applications.
3.
CM009068 VESA rotator plate gives additional positioning options, but is not required
depending on mounting preference.
ALWAYS!
Read all instructions before installing any Havis, Inc products.
Use hardware provided with install kit
TOOLS REQUIRED:
•Ratchet Wrench
• Socket Set
• 7/16” Open End Wrench
• Phillips Screwdriver (short)
• Dash panel removal tool
• Wire stripers/cutters
INSTALLATION INSTRUCTIONS
C-DMM-
3015
Flip up Dash Monitor Mount
2020 Ford Interceptor Utility
This mount is designed to attach to Havis vehicle specific consoles. Other
consoles may require modification.
