KK-XXX-06_INST_8-07
19
Socket
Ball
Item #14
to
doors and frames
Attach Ball & Socket Style Doorstop.
1
st
Attach “Ball” portion of assembly. Attach to threaded hole on the door using a ¼” x 1” Hex
head bolt.
nd
2
Attach the “Socket” and bracket portion. Attach to doorframe using #8 x ¾” Phillips machine
screws and keps nuts.
Silicone all seems and joints.
This will allow the unit to be
hosed out.
In the upper corner of each side
of the
3
rd
Compartment
Doorframe
are small filler
panels that need to be installed.
Attach using ¼” x ¾” carriage
bolts, washers, and serrated
Item #11
Place trim panels as shown above
Pre-drill through trim panel (only)
with 3/16”. Pre-drill the vehicle
w/ 1/8” hole and attach panels
using #10 x 1” sheet metal screws
Item #15
