KK-XXX-06_INST_8-07
11
Current view of installation
Place
Center Divider
into
vehicle.
Item #5
Item #4
Item #3
Approximate center
Item #5
Carefully place
Driver-side
Ceiling
section into vehicle.
Item #7
Loosely bolt
Center Divider
to
Front Bulkhead
Item #5
to
#3
Place (2)
Diamond Plate Floors
between
Bench/Wall
assemblies and
Front bulkhead
.
Place cardboard
along side of bench while positioning
the floor to avoid scratching the bench.
Item #4
&
#13
Be careful that exposed wires are not touching metal and optional
KK-
x-VAK
hoses are not completely crushed
Note: Vent hose will be tight in spots. If hose are crushed to an oval
shape the airflow will still be good. Avoid completely crushing hoses.
The floor(s) will square the benches
and bulkheads to the kit.
