Haverland RCB, Инструкция по установке и эксплуатации

Страница: 6 / 12

6
Comfort from 05:00 to 10:00 h and from 17:00 to 23:00 h has selected comfort temperature and the economy
temperature in the other time slots. See the following picture:
If, during the time setting and weekly program, the ON/Stand-by button is pressed, the RCB goes into stand-by
state, saving the new timing/date while the new weekly program is not saved.
With a new pressing on the ON/Stand-by button , the RCB goes into ON state into the mode that was present
before the time setting.
In case of 230Vac supply power cut off, the chrono weekly program, the high and low temperature are retained into the
memory, instead the current time is lost.
After the 230Vac power supply comes back, if one of the chrono modes is selected (chrono, P1, P2, P3), the symbol
and the display writing flickers (the time or P1, P2, P3 depending on the mode selected): in that case following the
procedure described at the beginning of the paragraph it is possible to set the time.
Until the operation is not performed, RCB temporarily counts the time from the moment when the power supply 230Vac
has become available again (and this "temporary" time is used in case you selected one of the chrono mode).
RCB has the possibility to use the “classic” CHRONO Mode (to be setup by the user) and also three type of integrated
programming modes, named P1, P2, and P3 respectively.
To switch from one mode to the next mode push the FUNCTION button until you find the desired mode.
The modes P1, P2 and P3 work as follow:
P1
Monday-Friday: Comfort from 06:00 to 08:00 h and from 17:00 to 00:00 h
Saturday-Sunday: Comfort from 06:00 to 08:00 h, 12:00 to 14:00 h and from 17:00 to 00:00 h
P2
Monday-Sunday: Comfort from 17:00 to 00:00 h
P3
Monday-Sunday: Comfort from 08:00 to 20:00 h
- - - - - - - - - - - - - + + + + + + + + + +
COMFORT
COMFORT
FINAL
Pressing the buttons:
Comfort
or
Economy
1.6. INTEGRATED PROGRAMMING MODES
P1
P2 P3