* Place the appliance in a vertical position to allow to read the package and proceed to
unpack the heater.
* Remove the mounts, wheels and
one clamp
from the polystyrene protection, leaving
the protection placed on the appliance.
* Place the appliance in an inverted position using the polystyrene as a support base.
8
OPERATION
ASSEMBLY OF THE MOUNTS AND WHEELS
* Connect the appliance to the socket (220 - 240 V - 50 Hz) with the switch on the zero
position.
* Turn the button of the thermostat to position maximum.
* Put the switch on position 1. Minimum power will be obtained.
* Put the switch on position 2. Medium power will be obtained.
* Put the switch on position 3. Maximum power will be obtained.
To determine the desired temperature, put the thermostat button on maximum. Once a
comfortable temperature has been obtained, turn the button slowly in an anticlockwise
direction until the light turn off. This thermal control device will maintain the temperature
constant.
KIT
1
2
4
3
clamp
