Haverland AIRPURE 19, Инструкция по эксплуатации

Страница: 32 / 85

14
Put filter 1 (HEPA filter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you
Put filter 2 ( Activated Carbon filter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
Put filter 3 (Pre-filter) back into the appliance.
Note: Make sure that the side with the two tabs is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
To reattach the front panel, insert the bottom hooks into the
bottom of the appliance first (1) . Then push the panel against the
body of the appliance (2).
Put the plug in the wall socket and switch on the appliance again.
Press the filter reset button with a thin tool.
Note : You do not need to press the filter reset button after cleaning
filter 1 (pre-filter).
Note : You cannot reset the appliance when you replace a filter before
its filter replacement light starts flashing.
Note: You cannot reset the appliance if it is not plugged in and
switched on.