ESC2EYEST-US-INS-LAB-RevA20 16
3.4 ELECTRIC CONTROL LOCATIONS
3.4.1 Pendant Control Storage Location
The pendant is located on the pendant holder
on either side of the chair (Figure 3.4-1).
s
NOTICE: Place pendant on holder when
not in use. Keep cord clear of moving
parts.
3.4.2 Plug Location
This chair is equipped with a battery back-up
for transport but the unit should be plugged
into a wall receptacle when not in transport.
The plug is located on the back of the control
box (Figure 3.4-2). Do not position the unit so
that it is difficult to disconnect the plug.
WARNING:
ESC2EYEST Procedure
Chair is equipped with a built in battery
back-up system: nevertheless, the
unit should remain plugged into wall
receptacle during normal use. The battery
back-up is recommended for transport
and emergency only.
3.4.3 Low Battery Alarm
This chair is equipped with an audible and
visual low battery alarm. When the system
requires charging, a continuous beep will
sound during motor operation, the pendant
LED above the
BATTERY
button will illuminate
green, and the control box LED will illuminate
amber.
3.4.4 Foot Control
Large red circle indicates optional foot control
storage location (Figure 3.4-3). Small red circle
indicates foot control plug-in location (Figure
3.4.3), which can also be used as an alternate
pendant plug-in location.
Figure 3.4-1
Figure 3.4-2
Figure 3.4-3
