Page 7 / 13
EN-V233-0009-CA
Installing and using the HAUSSMANN RIRI keypad
STAND-ALONE
KEYPAD
OPERATION
The HAUSMANN RIRI keypad can work as a stand-alone. It just needs to be programmed and
installed at the entrance to the building.
In this functioning mode, the keypad must be configured outside.
Enter programming mode as described above and use the following functions:
Stand-alone keypad cabling
Add access codes
To program the codes, proceed as follows:
ENTER PROGRAMMING MODE
Example: Add the code "1234" in
position 1
TYPE IN THE CODE NO.:
-
to open door 1 only
-
to add the master code
-
to open door 2 only
-
to open doors 1 and 2
-
to open door 1 only at pre-set times
-
to open door 2 only at pre-set times
-
to open doors 1 and 2 only at pre-set times
01 to 30
06
32 to 49
50 to 53
54 and 55
56 and 57
58 and 59
TYPE IN THE NUMBER OF DIGITS FOR THE
CODE:
4 to 8 digits
TYPE IN THE CODE TO BE SAVED:
0 to 9; A and
B
+ +
"2 beeps to confirm setting saved"
"1 long beep for an error"
NB: Use the button inside the keypad to enter programming mode during installation.
Delete access codes
To delete the codes, proceed as follows:
ENTER PROGRAMMING MODE
Example: Delete the 1
st
access code.
TYPE IN THE CODE NO.
FOLLOWED BY THE
A
KEY
01 to 59
+ A
"2 beeps to confirm cancellation"
Door 1
PB
Door 2
PB
POW
12/24V AC/DC
150 mA
External clock
(Not supplied)
Door 1
Control
Door 2
Control
Intelligent Security & Fire Ltd.
