Page 6 / 13
EN-V233-0009-CA
Installing and using the HAUSSMANN RIRI keypad
ENTERING
PROGRAMMING
MODE
Entering programming mode can be done in two ways:
1) Press the "PROG" button on the back of the board (on fitting)
2) Enter a master code directly into the keypad outside.
The red LED lights up to confirm that you are in programming mode.
The buzzer emits:
- 2 short beeps to confirm setting saved or a positive response.
- 1 long beep in the event of an input or programming error.
After five seconds of no activity, any incomplete programming sequence is deleted and the
buzzer emits a beep.
In real-time use:
This programming mode enables you to manage the master code and door-opening time.
In stand-alone keypad use:
This programming mode enables you to manage access codes and the master code, the door-
opening time and to check memory capacity.
1
2
Intelligent Security & Fire Ltd.
