Haussmann 59695008, Руководство оператора

Страница: 22 / 32

22
SAFETY INSTRUCTIONS
these are connected and properly used. Use of
dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and o. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations dierent
from those intended could result in a hazardous
situation.
5) Service
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
Additional safety rules for hand push
blower/vacuum
• Always wear adequate protective clothing
when operating the tool to avoid injuries to face,
eyes, hands, feet, head or hearing. Use safety
glasses or a face shield, high boots or sturdy
shoes, long pants, work gloves, a hard hat and
ear protection.
• Do not start the tool when it is upside down or
when it is not in the operating position.
• Switch the motor off and remove the plug
when the tool is not being used, left unattended,
being cleaned, being moved from one place
to another or when the extension cord is
entangled or damaged.
• Do not operate the tool near people, especially
children or pets. Turn it o if they get too close.
Maintain a safe distance of at least 16 ft (5 m)
from other people when using the tool.
• Never direct the blower tube or blow debris
towards bystanders or pets.
• The operator is responsible for accidents or
hazards occurring to other people or their
property.
• Do not handle the plug or the tool with wet
hands and do not use the tool in the rain.
• Use only outdoor rated extension cords that are
so marked. Keep the extension cord away from
heat, oil and sharp edges.
• Ensure that the extension cord is secured in
a manner that prevents it from disconnecting
from the plug or while in use.
• Keep all the air intakes and the blower tube
free of dust, lint, hair and other material that
may cause a reduction in air flow.
EN