manualshive.com logo in svg

HAUSSLER HM 70, Руководство по эксплуатации

Поделиться
Скачать
HAUSSLER HM 70 Скачать руководство пользователя страница 22

Checking and setting the tension of the drive belt

 

Check the tension of the drive belt after the first 5 hours of operation. Retension 

the belt if necessary.

 

Check the drive belt after every 50 hours of operation.

 

i

You need a Phillips screwdriver to remove and assemble the cover.

 

i

You need a size A/F 17 wrench to set the tension of the drive belt.

Disconnect the power supply

 

Switch off the main switch.

Remove the protective cover

 

Unscrew the bolts and set the protective cover down on the motor. 

Check the tension of the drive belt 

 

Take hold of a drive belt with one hand and turn it through 90 degrees.

 

i

To turn the drive belt through more than 90 degrees, you must retension the belt.

Retension the drive belt

 

Unscrew the locking nuts.

 

Turn the adjusting bolt to set the tension of the drive belt.

 

Then screw the locking nuts tight again.

Assemble the protective cover

 

Lift up the protective cover and line it up with the protective motor housing.

 

Screw the protective cover back onto the protective motor housing.

22

Maintenance

Содержание HM 70





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды